Cracked your Moto G Pure screen? You're not the only one. Whether it slipped out of your pocket or took a rough fall off the counter, that spiderwebbed glass is a familiar heartbreak. The good news? You don’t need to panic—or shell out a hundred bucks to fix it.

We’ve got you. In this guide, we’re going to walk you through everything you need to know about moto g pure screen replacement at home, step by step, no tech degree required.

We'll cover all the tools, tips, got Chas, and most importantly—how to get it done without turning your phone into a paperweight. Let’s jump in.

Before You Begin: What You’re Getting Into?

Let’s be real. Replacing a phone screen sounds intimidating. But with the Moto G Pure, it’s very doable—if you’re patient and a little careful.

This phone has a 6.5-inch LCD screen, and when the glass breaks, it usually means you’ll be replacing the whole screen assembly (LCD, touch digitizer, and glass together).

So yes, it’s a bit more than just peeling off broken glass and popping in a new layer. But with the right tools and some attention to detail, you can absolutely pull this off.

Everything You’ll Need

You don’t need a full repair lab for moto g pure screen replacement. Most of this you can order online or find in a basic phone repair kit. Here’s what you’ll need:

A replacement screen made specifically for the Moto G Pure
A small Phillips screwdriver
A plastic prying tool (guitar picks work in a pinch)
A suction cup (to help lift the screen)
A heat gun or hairdryer (yes, your hairdryer will work)
A pair of tweezers
Some pre-cut adhesive strips or phone glue
A SIM tray ejector or paperclip
Optional but helpful: antistatic wrist strap, magnetic parts tray, microfiber cloth

Once you've got all that, clear off your workspace—a clean table with good lighting is your best friend here.

Step 1: Power Off the Phone & Pop the SIM Tray

Turn off your phone completely. Then, using a SIM ejector or a straightened paperclip, remove the SIM tray and set it aside. You’ll be glad you did later, trust us.

Step 2: Heat Things Up (Gently)

The screen is glued in pretty tightly, so to get it off, you’ll need to soften the adhesive. Fire up your hairdryer or heat gun, and gently heat the edges of the screen for about 2-3 minutes. Don't scorch it—just warm it up enough so the glue softens.

Pro tip: Keep the heat moving. You’re not trying to cook the phone.

Step 3: Start Lifting the Screen

Now comes the careful part. Stick your suction cup on the lower portion of the screen and gently start pulling up to create a tiny gap. Slide a plastic pry tool into that opening and slowly work your way around the edges.

You’ll feel the adhesive popping loose as you go. If you feel resistance, pause and reapply heat. Don’t force anything. Rushing here is the fastest way to crack something worse.

Also: Don’t pull the screen off completely yet. It’s still connected inside.

Step 4: Unplug the Cables Like a Pro

Lift the screen just enough to see inside. You’ll see metal shields covering the connectors. Grab your screwdriver and carefully remove the screws holding those shields in place.

Once the covers are off, unplug the battery first. Always start there—it’s the safety rule of thumb in phone repair. After that, unplug the screen and digitizer cables.

Now you can fully remove the broken screen. Feel free to sigh in relief. You just did the scariest part.

Step 5: Clean Out the Old Gunk

This is your cleanup phase. Use tweezers to peel off any leftover glue or adhesive from the frame. You want a nice clean surface for the new screen to stick to.

If you’ve got any rubbing alcohol (isopropyl alcohol), put a little on a cloth and wipe around the edges. Make sure no glass shards or debris are left behind.

Step 6: Test the New Screen First (Don’t Skip This!)

Before gluing anything down, plug in the new screen, reconnect the battery, and power the phone on.

This is just a dry run. Make sure:

The screen lights up properly
The touch function works across the whole screen
There’s no flickering, dead zones, or weird colors

If everything looks good, shut the phone down again and disconnect the screen. Trust us—you’ll thank yourself if you find a bad screen now instead of after gluing it down.

Step 7: Stick It Down

Apply your adhesive strips (or phone glue) to the edges of the phone frame. Be careful not to block any cameras or sensors.

Reconnect the new screen cables, pop the metal shields back on, and screw them in snug (but don’t overtighten). Then line up the screen with the phone body and press it down evenly around all the edges.

Apply even pressure for a minute or two to help the glue stick properly. You can even stack a book on top of the phone for a few minutes—old-school but effective.

Step 8: Power On & Test Everything Again

Reinsert the SIM tray. Boot up your Moto G Pure and test:

Touch responsiveness
Brightness levels
Front camera and mic
Speaker and proximity sensor
Fingerprint sensor (if applicable)
Charging port alignment

Take your time here—better to find an issue now than later.

What If Something Goes Wrong?

Don’t stress. Here are a few common issues and what to do:

Screen not turning on? Recheck the cable connections. One might be loose.
Touch not working? Make sure the digitizer cable is seated properly.
Lines or flickers? Likely a faulty screen—contact the seller for a replacement.

Most issues are fixable with a little patience and double-checking.

How Much Are You Saving by Doing It Yourself?

Let’s talk numbers.

Replacement screen: $25–$40
Tool kit (if you don’t already have one): $15–$20
Professional repair quote? Usually $80–$120, depending on your location.

You’re saving a solid $50–$100 by doing this yourself—and learning a new skill while you’re at it.

When You Might Want to Leave It to the Pros

There are some cases where it’s smarter to take it to a technician:

If your phone also has water damage
If you’re uncomfortable handling electronics
If your screen doesn’t power on at all, even after a replacement
If the damage is deeper than the screen (like motherboard issues)

Know your limits. There’s no shame in calling in a pro if needed.

Moto G Pure Screen Replacement Cost and Best Kits to Use

When your Moto G Pure screen cracks or becomes unresponsive, it’s tempting to let frustration get the best of you—and maybe even reach for your wallet without a plan.

But we’re here to guide you through not just the Moto G pure screen replacement process, but also the costs involved and the best kits to use, ensuring you get quality results without overspending.

Understanding the Cost Structure: What You’re Really Paying For

When you hunt for a replacement screen online, you might see listings scatter from $20 all the way to $60 or more. That wide range isn’t arbitrary—it reflects key differences:

OEM vs. Aftermarket: Genuine OEM panels (made by Motorola or partners) command premium prices but guarantee correct fit, touch sensitivity, and color accuracy. Aftermarket versions are cheaper but vary widely in quality.
Adhesive and tools included: Bulk kits often bundle in adhesive strips, pry tools, and suction cups. Standalone screens are cheaper, but will require you to buy tools separately.
Market source: US and European suppliers typically charge more than sellers based in Asia or other low‑cost regions.
New vs. refurbished: Refurbished screens can under‑cut prices, but risk reliability and often carry no guarantee.

Why Kit Quality Matters More Than Price Tag

A super‑cheap screen might save a few dollars until you power it on. A poor glue job can result in peeling, dead pixels, and inaccurate touch responsiveness.

A trusted kit, even if slightly pricier, delivers better installation experience, long‑term durability, and reliable performance.

We recommend spending slightly more (around $30–$40) for a kit that includes:

A high‑quality replacement panel (preferably OEM or OEM‑grade)
Pre‑cut adhesive for the frame (precision matters)
A reliable tool kit with pry tools, suction cup, and screwdrivers
Instructional manual or video link

Think of it like this: the difference between a cheap replacement and a good kit is closer to $10–$15, which pales compared to the hassle and cost of a failed repair.

Top Replacement Kits for Moto G Pure: Ranked and Reviewed

1. “Moto Pure OEM Quality Complete Kit”

Screen grade: OEM‑grade or genuine Motorola replacement
Included items: LCD/digitizer front assembly, adhesive strips, full tool kit
Advantages: Plug‑and‑play performance, color accuracy, robust build quality
Caveats: Slightly higher price (~$50); ensure vendor has return policy

We recommend this for anyone seeking a long-term, factory-like user experience.

2. “Budget Buddy Full Replacement Kit”

Screen grade: Aftermarket but 100% new, tested
Included items: Screen, adhesive, basic pry kit
Advantages: Excellent cost‑to‑value ratio (~$30); good touch response
Caveats: Colors may appear cooler or warmer; minor glue inconsistencies may appear within weeks

This option is ideal if budget matters most and you’re comfortable with occasional visual quirks.

3. “Screen Fix Pro Toolkit Bundle”

Screen grade: OEM‑grade
Included items: Enhanced tool kit with spudger, magnetic tray, metal picks
Advantages: Helps make the process beginner‑friendly; tools are durable
Caveats: Slightly bulkier packaging; price closer to $55

This is our pick for DIY beginners who value organization and precision during repair.

4. “Refurbished Screen Saver Pack”

Screen grade: Refurbished OEM screen, professionally re‑built
Included items: Screen and adhesive only
Advantages: Delivers OEM performance at lower cost (~$35–$40)
Caveats: No tool kit, limited warranty

Great if you already own your tools but still want OEM-level quality without OEM pricing.

What to Look For When Buying a Kit

Before you hit “Buy Now,” run a quick checklist:

Panel Type: OEM or OEM-grade is preferable. Avoid vague “universal” claims.
Warranty Length: 90 days minimum — a 1-year warranty is great.
Adhesive Quality: Pre‑cut adhesive is better than jelly‑like glue that you spread yourself.
Tool Completeness: Include pry tools, suction cup, screwdrivers; antistatic wrist straps are a bonus.
Seller Reputation: Verified reviews, trade history, and responsiveness matter.

Step‑By‑Step Cost Analysis

You want a practical, real-world budgeting breakdown for Moto G pure screen replacement? Here it is:

Replacement Screen

OEM-grade: ~$45
Aftermarket: $20–$30
Refurbished: $35–$40

Adhesive

Pre-cut kit: $5–$10
DIY glue: $3–$5

Tools

Full DIY kit: $10–$20
Already own tools: $0

Shipping & Duties

Domestic: $4–$10
International: $10–$20

Total estimated repair cost:

Bare minimum: $28 ($20 screen + $3 adhesive + free/tools + $5 ship)
Mid-range: $50 ($35 screen + $7 adhesive + $8 tools + $10 ship)
Premium: $75 ($45 screen + $10 adhesive + $15 tools + $15 ship)

This sets you up to decide precisely how much you’re ready to invest, and why.

Insurance? Warranty? Doing It Right First Time?

An overlooked cost is potential repeat repairs. Buying a cheaper screen only to have it fail in 2 months means ordering another and repeating the install doubling your effort and shipping time.

On the flip side, professional services charge more upfront (often $80–$120), but include labor and warranty. Balance your decision:

If you trust your skills, DIY can save money.
If you prefer shortcuts and guarantees, go pro—but expect to pay more.

The Human Touch: Why You Should Do It

Replacing your own Moto G Pure screen is more than money savings—it’s a confidence-building project.

You see the internals, reconnect cables, flush thermal adhesives, and calibrate touch. You finish with a skill you didn’t have before. Plus, every time someone says, “Wow, did you fix that?” you get to say “Yes, I did.”

That sense of mastery is priceless—and now, it's reachable with the right kit and a bit of hands-on courage.

How We Recommend You Proceed

Choose Your Quality Tier

Want premium reliability? Go OEM‑grade.
Want to minimize cost? Go for a tested aftermarket screen.

Select Your Kit

Tool bundles if this is your first repair.
Adhesive included to save trouble.

Follow the Best Practices

Power off, heat well, keep parts organized.
Test the screen before sealing it in—save time and frustration.

Keep Evidence

Save packaging, order receipts, kit details—just in case.
Take photos during disassembly—it helps reassembly a lot.

Finish Strong

Document your work so you can confidently claim results later—especially important if you plan to sell or trade your phone later.

FAQ: Smart Choices for Smart Repairs

Is ordering overseas risky?
Not necessarily—but add 10–20% for shipping delays and customs. Use a seller with solid ratings and clear return policies.

What if the touch response seems slow?
This typically points to a low-quality digitizer. If it’s OEM-grade, you should get latency under 50 ms. Replace if not responsive enough.

What if the glue peels after a few weeks?
That means adhesive quality wasn’t up to par. Improvised epoxy here is a fix—but better to start with a kit delivering pre-cut adhesive.

Conclusion: You’ve Got This

Moto G pure screen replacement might feel like a big job, but if you made it this far—you’ve already done the hardest part: deciding to try.

And once you see your phone light up with a brand-new screen that you installed yourself, there’s nothing quite like that feeling.

You just saved money, gave your phone a second life, and probably impressed yourself a little. That’s a win.

So next time someone tells you they broke their phone, you’ll know exactly what to say:

“You can fix that yourself.”

How to Switch Hearing Adds Between iPhone and iPad?

Your cart is currently empty.

Moto G Pure Screen Replacement: Step-by-Step DIY Guide